How to deal with water mist on the camera lens?
1、 There may be gaps on the camera body, causing water vapor to enter.
2、 The humidity inside the camera may be high during installation, and the sealed card slot cover of the camera may not be tightly closed for a long time, which can cause excessive humidity inside the camera. When the temperature drops, it will condense onto the lens glass.
1、 Open the sealed rubber or cover on the camera card slot, then plug in the power to keep the camera in a working state. Then cover the camera with an opaque box to turn on the infrared light.
When the camera fill light is turned on, the camera temperature will slowly rise to around 60 degrees, evaporating water from the outside of the machine. After working for 48 hours in this way, take out the camera and quickly cover the sealing rubber or cover of the camera card slot, which can basically eliminate this problem.
Principle: By turning on the camera's fill light, the temperature is increased. After the water evaporates into steam, the humidity inside the camera will decrease under the action of high temperature, and then it will be quickly sealed. Can reduce the humidity inside the camera. Prevent the occurrence of condensed water again.
Welcome To Be LS VISION Partners
LS VISION: For a Better World
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.